How to play

How to play Zip

Draw one path through every cell. Pass the numbers in order and finish on the last one.

A board mid-route: the path has left the 1, and the ringed 2 is its next stop.
The basics

Rules of the game

1

One path through every cell

Draw from 1, one cell at a time: up, down, left or right. The path cannot cross itself. The board is solved when every cell is filled and the path ends on the last number.

2

Numbers in order

Pass the numbers in sequence: 1, 2, 3 and on to the last. Reach one early and the board rings it red and says so, but it never stops your hand. Go back and take them in order.

3

Walls block the way

A thick line between two cells is a wall, and the path cannot cross it. Both cells still have to be filled, so the path reaches each of them from another side.

4

Stuck? Go back

Tap any cell on the path to cut the path back to it, or drag backward to erase. Undo steps back one cell and Reset clears the board. Any route that fills the board wins, so there is no penalty for trying.

Interactive practice

Solve your first Zip board

This board is playable: you draw on it right here. It is one real 6×6 puzzle, played from the 1 to the finish in six short steps. Each step is one thing to know, where it matters on this board. Make the mistake a step invites and the board says what went wrong, in the words the real board uses. Nothing here is timed or scored.

Step 1 of 6

Start on the 1

Every path starts on the 1 and grows from its own end, one cell at a time: up, down, left or right, never diagonally.

Press the 1 and drag along the dotted line.

Use arrow keys to draw and Backspace to undo.

6 more cells along the dotted line.

Draw
Press the end of the path and drag, one cell at a time.
Go back
Tap a cell on the path to cut the path back to it, or press Undo.
Keyboard
The arrow keys draw from the path's end, and Backspace takes a step back.
Interactive practice

Now solve one on your own

These boards are playable too, and nothing is drawn for you. Three real boards, each a step up from the last. Take a wrong turn and the board says so at once, on the board, and points the way back.

Board 1 of 3: 5×5 warm-up

A small board with ten numbers, so the numbers mark out most of the way.

Press the 1 and draw. Fill every cell and finish on the 10.

Use arrow keys to draw and Backspace to undo.

1 of 25 cells filled. Next number: 2.

Draw
Press the end of the path and drag, one cell at a time.
Go back
Tap a cell on the path to cut the path back to it, or press Undo.
Keyboard
The arrow keys draw from the path's end, and Backspace takes a step back.
Practise the reasoning

Zip lessons

Four habits that finish a board. Each lesson shows the idea on boards the game dealt, then gives you one to draw on.

  1. Lesson 1 · Start here

    Go around a wall

    See how a wall bends the route, and why both sides still get filled.

  2. Lesson 2 · Core

    Avoid dead ends

    Count a cell's open sides and take the corner before it is stranded.

  3. Lesson 3 · Core

    Keep the empty cells connected

    Spot the step that fences empty cells off from the rest.

  4. Lesson 4 · Planning

    Work backward from the finish

    Find the only way into the last number and read the route back.

Choose a puzzle

Board size and difficulty

Choose a 5×5, 6×6, 7×7 or 8×8 board separately from its level. The board is how much ground the path has to cover. The level is how much of the route is pinned down for you: harder levels give fewer numbers, so there is more route between fixed points, and walls first appear at hard.

  • 5×525 cells
  • 6×636 cells
  • 7×749 cells
  • 8×864 cells
  • easymany numbers
  • mediumfewer numbers
  • hardfew numbers, walls
  • expertfewest numbers, walls

Judged by rules, not by an answer sheet

The board never compares your path against the dealt route. It checks coverage, order and the walls as you draw, and a number rings red the moment it is passed out of turn.

Questions

Frequently asked

Ready to play?

No Zip rooms are going right now — yours would be the first. Pick the board and the length, or take the defaults.